014-1061-030 - Follower plate for pumps with shank 30 mm subgroup-pneumatisch-dubbelwerkende-membraanpompen and 5-YEARS on the pump

and 5-YEARS on the pump

The pre-chamber permit the immediately control of quantity and quality of the aspirated oil

After depressurization have an self-regulating working without the necessity of continue connection of compressed air

and it can be regulated according to the height

017-1155-000 Afsluiter

014-1061-030 - Follower plate for pumps with shank 30 mm subgroup-pneumatisch-dubbelwerkende-membraanpompen and 5-YEARS on the pumpIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.