Oneway 1224 Wood Lathe | 110V and 220V Models Cylindrical Grinding Modules and foam inserts every 1-3

and foam inserts every 1-3 months depending on the frequency of use

1/2" (12mm)

dash and blank spacer template (2 each)

The wire speed cannot be adjusted under quick feed mode

1 magnetic bit storage

Oneway 1224 Wood Lathe | 110V and 220V Models Cylindrical Grinding Modules and foam inserts every 1-3GENERAL DIMENSIONS Spindle Height: 44 Power Input: 110V, Single Phase Length x Width: 47 x 23 Bench Height: 30 Weight: Approximately 300 lbs. 12 swing over the bed (9 swing over Banjo) 24 between centers 11 Stainless Steel Toolrest with 1 Post 2 step pulley (50 2000 100 4000 rpm) Two position Control Box Spindle is hardened and ground Spindle Thread: 1 8tpi RH (inboard 16tpi RH (outboard) 7 16 thru hole (in spindle) 24 position indexing #2 Morse Taper