TLS Quad Coupler 1.5 Finish:Black The assembly includes all of

The assembly includes all of the parts listed in the Section Diagram and a 24V Reversing Contactor

- ANSI Z359

1" x 6″ × 31-3/8" 6061T-6 Aluminum CNC machined with pockets to support one piece of 30" truss

These cartridges are installed on Terminal Strip Segments in Next-Gen Lodestar contactors

This bearing is installed on the end of the First Pinion and fits all Prostar Hoists

TLS Quad Coupler 1.5 Finish:Black The assembly includes all ofThe Quad Coupler 1. 5 will clamp from 1. 25 OD to 1. 5 OD tubing, as well as 1" pipe (1. 315" OD.) The Quad Coupler 1. 5 is 1. 25" thick. The notch on the outside of clamp is 1. 26" across the flats and will fit over 1 1 4" square tube, while locking the clamp parallel with the 1 1 4" square tubing. Use the flat face to bolt to a fixture, or to allow the Quad Coupler 1. 5 to rotate when fastened to square tubing. The distance from the bottom of the